Placeholder
TH007 Polyurethane Thinner
Back to products
Placeholder
WD161 Waterborne Amino Baking Paint
Awaiting product image
Click to enlarge

WA160 Water-based Acrylic Coating

WA160 is an environmentally friendly coating that uses water-based acrylic resinThis product features high solid content at construction viscosity, low VOC content, and excellent anti-corrosion and decorative properties.

Inquiry Now
Name *
Email *
Enter enquiry subject *
Message *
WhatsApp
SKU: WA160 Water-based Acrylic Coating Category: Tags: ,
Description

Overview

WA160 is an environmentally friendly coating that uses water-based acrylic resin as the film-forming substance and anti-rust pigments and fillers as functional components, combining anti-rust and decorative functions. This product features high solid content at construction viscosity, low VOC content, and excellent anti-corrosion and decorative properties.

Product Characteristics

  • Hard and wear-resistant film with protective properties
  • Safe and environmentally friendly, with extremely low VOC content
  • Good drying performance and water resistance

Recommended Applications

  • Steel structure factories
  • Coating on container production lines
  • Mechanical equipment, etc.

Technical Parameters

ItemDescription
Paint Type/Pigment TypeWater-based acrylic resin, anti-rust pigments and fillers
ColorVarious colors
Surface FinishSmooth surface
GlossCustomizable according to client requirements
Mixing RatioSingle-component
DensityApproximately 1.1–1.3 kg/L
Volume Solids>40% (theoretical value)
Theoretical Coverage8–10 m²/L (calculated at 40 μm dry film thickness)
Single Film ThicknessWet film: 90–110 μm; Dry film: 40 μm
Application MethodsAirless spraying, air spraying
Spray Nozzle (Airless)0.43–0.58 mm
Outlet Pressure (Airless)8 MPa
Diluent/CleanerDeionized water
VOC Content<100 g/L
Drying TimeTouch-dry: 30 minutes (23°C; 50% relative humidity)
Full cure: 7 days (23°C)
Recoating IntervalMinimum: 4 hours (23°C)
Ambient TemperatureMinimum 5°C, maximum 40°C.
Avoid construction below 5°C or at RH >85%.
Substrate temperature must be 3°C above dew point.
Packaging20 kg containers
Storage and Shelf LifeStore in accordance with national regulations.
Keep in a cool, well-ventilated place away from high temperatures.
Tightly seal containers. Valid for 1 year.

Application Guidelines

Surface Preparation
WH-WA160 is designed for direct application on steel surfaces pretreated by sandblasting to Sa2.5 grade in accordance with Swedish standard SIS 055900. All surfaces must be free of oil, moisture, or other contaminants before sandblasting. For questions, contact our company.
Mixing and Dilution
WH-WA160 must be stirred before use. Stir the base material until smooth and uniform, no more than 5 minutes. Dilution is generally not required or recommended, as excessive dilution may adversely affect construction and film performance. A variable-speed electric mixer is recommended.
Application
WH-WA160 can be applied by air spraying or airless spraying. When using airless equipment, a Graco 30:1 pump with a nozzle size of 0.43–0.58 mm is recommended to ensure good spray pattern. For optimal coating results, ensure equipment and fluid lines are clean and free of water and solvents, and achieve uniform film thickness. A recommended spray angle is 40°–70°. For roller application, use new short-fine nap rollers.

Safety Precautions

  • Warning: May cause eye and skin irritation. Vapors may cause respiratory irritation in sensitive individuals. May cause skin allergic reactions. Avoid inhaling vapors. Do not contact eyes or skin.
  • Use protective equipment for eyes, ears, and skin. Wear a suitable respirator to prevent potential respiratory irritation.
  • After use, thoroughly wash skin with water. If discomfort occurs, consult a physician. Wash clothing before reuse.
  • In case of respiratory arrest, perform mouth-to-mouth resuscitation and seek medical attention immediately. If contact with eyes occurs, flush with 清水 (clean water) for at least 15 minutes and seek immediate medical care.

Declaration

The information listed in this document is reliable. Each value provided is a theoretical data calculated from the product formula. If needed, our company can provide internal guarantees for any of the data above. This product is for professional use only. For any questions, please contact us.
Note: Since the conditions of use are beyond the manufacturer’s control, the information herein does not constitute a guarantee. Our Technical Support and Customer Service Center are ready to provide product consultation and application technical services. Welcome to contact us by letter or phone.

Contact:

Wanhua Energysav Science & technology Group Co.,Ltd
Address: No. 56 Taiyuan Road, Yantai, Shandong, China
Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006
 
More Similar Items
The Largest MDI Manufacturer and Polyurethane Raw Material Supplier
    Subtitle text example

    Title text example

    Text after title text example
    Additional information
    Weight 25 kg

    Related products

    Placeholder

    EP141 Universal Wear-Resistant Epoxy Coating

    Placeholder

    EP112 Epoxy Iron Red Primer

    Placeholder

    EP111 Epoxy Antirust Primer

    Placeholder

    CR113 Chlorinated Rubber Aluminum Powder Antirust Primer

    Placeholder

    AK162 Alkyd Enamel Paint

    Placeholder

    AK111 Alkyd Antirust Primer

    Placeholder

    AF165 Wuxi High-Solids Antifouling Paint

    Placeholder

    AF162 Tin-Free Self-Polishing Antifouling Paint