EP141 Universal Wear-Resistant Epoxy Coating

Overview

Product Features

• Excellent resistance to seawater
• Good compatibility with cathodic protection systems
• Strong adhesion to various substrates, including galvanized parts, carbon steel, stainless steel, and aluminum
• Wide construction temperature range (-5°C to 40°C)
• Applicable for low-surface-treatment substrates and damp surfaces
• Ultra-strong wear resistance
• Good compatibility with various topcoats, such as epoxy topcoats, polyurethane topcoats, alkyd topcoats, chlorinated rubber topcoats, and single-component acrylic topcoats

Recommended Applications

Technical Parameters

Environmental Conditions

• Minimum ambient temperature: 10°C
• Substrate temperature: At least 3°C above dew point

Packaging, Storage, and Shelf Life

• Two-component packaging, 25 kg set
• Storage must comply with national regulations. Store in a cool, well-ventilated place away from high temperatures.
• Containers must be tightly sealed. Shelf life: 1 year.

Surface Preparation

• New Steel: Blast to Sa2.5 standard. Before final application, thoroughly clean damaged shop primer and contaminated areas during storage and processing. Repair damaged parts with this product or other specified epoxy paints.
• Other Metals: Create a rough surface and clean with solvent to ensure dryness and no impurities.
• Maintenance: Remove grease with appropriate cleaners. Use high-pressure fresh water to remove salts and other contaminants. Remove loose rust and debris by blasting or power tools. Smooth corners, sweep away residues, and repair the film to the original thickness.

Mixing and Dilution

Application

Safety Precautions

• Warning: Irritating to eyes and skin. Vapors may cause respiratory allergies in sensitive individuals. May cause skin allergic reactions.
• Avoid inhaling vapors. Do not contact eyes or skin. Wear protective gear for eyes, ears, and skin.
• Use a suitable respirator to prevent potential respiratory irritation. Wash skin thoroughly after use. Wash clothing before reuse.
• In case of respiratory arrest, perform mouth-to-mouth resuscitation and seek medical attention immediately. If eyes are contaminated, rinse with clean water for at least 15 minutes and consult a doctor promptly.

Disclaimer