Placeholder
AC161 Acrylic Topcoat
Back to products
Placeholder
AC163 Acrylic Combined Primer and Topcoat Antirust Paint
Awaiting product image
Click to enlarge

AC162 Acrylic Topcoat

WH – AC162 is a topcoat formulated with acrylic resin, non – chlorinated plasticizer, and weather – resistant pigments. It has excellent light and color retention .

Inquiry Now
Name *
Email *
Enter enquiry subject *
Message *
WhatsApp
SKU: AC162 Acrylic Topcoat Category: Tags: ,
Description
 
General Description
WH-AC162 is a topcoat formulated with acrylic resin, non-chlorinated plasticizer, and weather-resistant pigments, featuring excellent light and color retention.

Product Characteristics

  • Fast-drying, physically drying type
  • Excellent light and color retention
  • Seawater resistance

Recommended Applications
Topcoat in acrylic and chlorinated rubber matching systems, used in medium to severe corrosion environments.

Technical Parameters

  • Resin/Pigment Type: Acrylic resin/weather-resistant pigments
  • Color: White, light gray, or customized as per user requirements
  • Surface: Semi-gloss
  • Density: Approximately 1 kg/L
  • Volume Solids: 32±1% (theoretical value)
  • Flash Point: 25°C (77°F)
  • Theoretical Spreading Rate: 8.0 m²/L at 40μm dry film thickness
  • Single Coat Film Thickness: Wet film: 125μm; Dry film: 40μm
  • Application Methods: Airless spraying, brushing, roller coating
  • Nozzle (Airless Spraying): 0.33-0.48mm
  • Outlet Pressure (Airless Spraying): 15 MPa
  • Thinner: TH0015
  • Tool Cleaning: TH015
  • Volatile Organic Compounds (VOC): 600 g/L
  • Drying Time: Touch-dry: 1 hour (23°C)
  • Recoating Interval: Minimum 4 hours at 23°C, maximum unlimited
  • Recommended Primers: As specified
  • Ambient Temperature: Maximum 40°C; avoid application at relative humidity above 85%. Contact local agents if in doubt.
  • Substrate Temperature: Minimum 3°C above dew point.
  • Packaging: Single-component, 20 kg packaging.
  • Storage and Shelf Life: Store in accordance with national regulations. Keep in a cool, well-ventilated place away from excessive heat. Containers must be tightly sealed. Shelf life: 1 year.

Application Guidelines

  • Surface Preparation: AC162 is designed for application on surfaces free of grease, dry soil, dust, moisture, and other impurities, with a suitable primer properly applied. Contact local offices if in doubt.
  • Mixing and Dilution: AC162 is a single-pack product. Stir the coating to obtain uniform consistency for no more than 2-3 minutes. Dilution is generally not required or desired; however, a small amount of thinner (5% or less) may be added for application purposes, subject to local regulations on VOCs and air quality.
  • Application: AC162 can be applied by conventional spraying, roller coating, or airless spraying. Nozzle: 0.33-0.48mm; Outlet pressure: 15 MPa. Ensure equipment and fluid lines are clean, free of water and solvents, and take care to achieve correct and uniform film thickness.
  • Ventilation: Good ventilation in all parts of enclosed areas is essential for the safety of applicators and the proper performance of this product. It is recommended not to apply AC161 too thickly.

Safety Measures

  • Warning: May cause eye and skin irritation. Vapors may cause respiratory irritation in sensitive individuals. May cause skin allergic reactions. Avoid breathing vapors. Do not contact eyes or skin. Use eye, ear, and skin protection equipment, and appropriate masks to avoid potential respiratory irritation. Wash skin thoroughly with water after use. Consult a doctor if discomfort occurs. Wash clothing before reuse. If breathing stops, give artificial respiration, preferably mouth-to-mouth, and seek medical attention. If eyes are accidentally exposed, rinse immediately with water for at least 15 minutes and seek medical attention immediately.

Declaration
The information listed in this document is reliable. Each value provided is a theoretical data calculated from the product formula. If needed, our company can inform the internal common measurement and determination methods for any of the above data. Since the conditions of use are beyond the control of the manufacturer, this information is not provided as a guarantee. The product is for professional use only. For any questions, please contact our company.

Our Technical Support and Customer Service Center is willing to provide you with product consultation and application technical services. Welcome to contact us by letter or phone.

Contact:

Wanhua Energysav Science & technology Group Co.,Ltd
Address: No. 56 Taiyuan Road, Yantai, Shandong, China
Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006
 
More Similar Items
The Largest MDI Manufacturer and Polyurethane Raw Material Supplier
    Additional information
    Weight 25 kg

    Related products

    Placeholder

    EP143 Low-Surface-Treatment Multifunctional Epoxy Anti-Rust Primer

    Placeholder

    EP141 Universal Wear-Resistant Epoxy Coating

    Placeholder

    EP112 Epoxy Iron Red Primer

    Placeholder

    EP002 Epoxy Sealing Paint

    Placeholder

    CR161 Chlorinated Rubber Topcoat

    Placeholder

    AK111 Alkyd Antirust Primer

    Placeholder

    AF162 Tin-Free Self-Polishing Antifouling Paint

    Placeholder

    AC161 Acrylic Topcoat