EP116 Phenolic Epoxy Coating
WH-EP116 phenolic epoxy coating is a two-component high build epoxy primer that can also be used as a topcoat. It has the characteristics of super wear resistance, high temperature resistance, corrosion resistance, seawater resistance, ablation resistance, chemical resistance, and high solid content.
SKU:
EP116 Phenolic Epoxy Coating
Category: Corrosion Protection Coatings
Tags: Coating, Corrosion Protection Coatings
Description
Overview
WH-EP116 Phenolic Epoxy Coating is a two-component, high-build epoxy primer that can also be used as a topcoat. It offers exceptional resistance to seawater, chemicals, and crude oil, along with excellent thick-film application properties, abrasion resistance, and impact resistance. With a wide operating temperature range (-5°C to 40°C), it demonstrates superior compatibility with various topcoats, including epoxy, polyurethane, alkyd, chlorinated rubber, and one-component acrylic coatings. Key features include ultra-high wear resistance, high-temperature resistance, corrosion protection, seawater resistance, ablation resistance, chemical resistance, and high solid content.
Recommended Applications
- Can be used alone as a universal primer for ballast tanks and various marine components.
- Suitable as a combined primer/topcoat for the inner linings of chemical plant storage tanks.
- Provides excellent corrosion protection in both freshwater and seawater environments when used with other paint systems.
Technical Specifications
Parameter | Details |
---|---|
Binder/Pigment Type | Phenolic epoxy resin / Anticorrosive pigment |
Color | Light gray, red, and other colors |
Surface Finish | Flat |
Mix Ratio (by weight) | 22 (base material) : 4 (curing agent) |
Curing Agent | CEP1160 |
Density | Approximately 1.4 kg/L |
Volume Solids Content | 100% |
Flash Point | 93.9°C |
Pot Life | 4 hours (23°C) |
Theoretical Coverage | 10 m²/L (calculated at 100μm dry film thickness) |
Single Coat Thickness | Wet film: 100μm; Dry film: 100μm |
Application Methods | Brush, roller, airless spraying, air spraying |
Airless Spray Nozzle | 0.53mm |
Airless Spray Pressure | 17.5 MPa |
Thinner Usage | Airless spraying: ≤25%; Air spraying: ≤50%; Brush application: ≤5% |
VOC Content | 0 g/L |
Touch Dry Time | 1 hour (23°C) |
Finger Dry Time | 2 hours (23°C) |
Full Cure Time | 7 days (23°C) |
Recoat Interval | 16 hours |
Recommended Primer | Self-priming |
Ambient Temperature | Minimum: 10°C |
Substrate Temperature | At least 3°C above dew point |
Packaging | Two-component, 26kg per set |
Storage & Shelf Life | Store in a cool, well-ventilated place, away from excessive heat. |
Ensure tightly sealed containers. Shelf life: 1 year. |
Application Guidelines
Surface Preparation
- New Steel: Blast to Sa2.5 standard. Before final application, thoroughly clean damaged shop primer and contaminated areas during storage and processing. Repair damaged parts with this product or other specified epoxy coatings.
- Other Metals: Create a rough surface and clean with solvent to ensure dryness and freedom from impurities.
- Maintenance: Remove grease with appropriate cleaners. Eliminate salts and other contaminants with high-pressure freshwater. Remove loose rust and debris by blasting or power tools. Smooth edges, sweep away residues, and repair the coating to achieve the original film thickness.
Application
- High temperatures shorten the pot life of the mixture, while low temperatures extend it.
- WH-EP116 can be applied by airless spraying, brushing, or rolling. Ensure good ventilation in confined spaces. Avoid application in the presence of standing water or rain. For airless spraying, use a 0.53mm nozzle with an output pressure of 17.5 MPa for optimal results.
Safety Measures
- Warning: May cause eye and skin irritation. Vapors may trigger respiratory allergies in sensitive individuals and potential skin allergic reactions.
- Avoid inhaling vapors. Prevent contact with eyes or skin. Use protective gear for eyes, ears, and skin. Use a suitable respirator to avoid potential respiratory irritation. Thoroughly wash skin after use. Launder clothing before reuse.
- In case of respiratory arrest, perform mouth-to-mouth resuscitation and seek immediate medical attention. If eyes are contaminated, flush with clean water for at least 15 minutes and consult a physician promptly.
Declaration
The information in this document is reliable. Each value is theoretically calculated from the product formulation. Internal measurement methods for the provided data can be disclosed upon request. Since usage conditions are beyond the manufacturer’s control, this information is not guaranteed. The product is for professional use only. For any questions, contact our company.
Our Technical Support and Customer Service Center is ready to provide product consultation and application technical services. Welcome to contact us by letter or phone.
Our Technical Support and Customer Service Center is ready to provide product consultation and application technical services. Welcome to contact us by letter or phone.
Contact:
Wanhua Energysav Science & technology Group Co.,Ltd
Address: No. 56 Taiyuan Road, Yantai, Shandong, China
Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006
More Similar Items
The Largest MDI Manufacturer and Polyurethane Raw Material Supplier
Subtitle text example
Title text example
Text after title text example
Additional information
Weight | 25 kg |
---|