EP003 Epoxy Sealing Paint

WH-WX010 Water-based Rust Conversion Paint features easy application, strong penetrability, rapid rust conversion, and fast film drying, delivering excellent rust conversion and anti-corrosion performance. With low VOC content, it is safe and environmentally friendly.

Name *
Email *
Enter enquiry subject *
Message *
SKU: EP003 Epoxy Sealing Paint Category: Tags: ,
Description

Overview

WH-EP003 is a low-viscosity, two-component epoxy sealing paint specifically designed for application on damp concrete surfaces. It offers excellent permeability, strong adhesion, and superior wet-curing performance.

Product Features

  • Exceptional wet-curing capability
  • Outstanding permeability
  • Easy to apply
  • Ideal for sealing damp concrete surfaces before topcoat application, with the usage amount determined by the requirement of just saturating the concrete surface.
  • Particularly suitable for high-performance paint systems and chemical-resistant coating combinations.

Technical Parameters

ItemDetails
Binder Type/Pigment TypeEpoxy resin/modified amine curing agent
ColorTransparent
Surface FinishHigh gloss
Mixing RatioWeight ratio: 4 (binder) : 1 (curing agent)
Curing AgentCEP0030
Volume Solids Content50%
Flash Point25°C
Pot Life6 hours at 23°C
Theoretical Spreading RateDependent on the condition of the substrate to be coated
Application MethodsRoller coating, brush painting, conventional spraying, or airless spraying
ThinnerMaterial: TH003; Cleaning: TH003
VOC (Volatile Organic Compounds)458 g/L
Drying TimeTouch dry: approx. 4 hours at 20°C; Hard dry: 7 days at 20°C
Recoating IntervalMinimum: 4 hours at 23°C (73.4°F)
Recommended PrimerNone
Substrate TemperatureAt least 4°C (7°F) above the dew point
PackagingTwo-component, 20 kg combined packaging
Storage and Shelf Life– Storage must comply with local regulations.

  • Store in a cool, well-ventilated place, away from excessive heat.
  • Containers must be tightly sealed.
  • Shelf life: 1 year. |

Application Guidelines

Surface Preparation
  • The concrete must be cured for at least 28 days.
  • The surface should be free of oil, loose particles, and other impurities.
  • Can be applied on damp surfaces, but no standing water is allowed.
Mixing and Dilution
  • As a two-component product, EP003 requires precise component ratio.
  • Thoroughly mix all contents of each paint bucket together. A variable-speed power mixer is recommended. Avoid overmixing, as this will accelerate curing and shorten the product’s pot life.
  • Add the curing agent and stir for 3 minutes.
  • High temperatures will shorten the mixture’s pot life, while low temperatures will extend it.
  • Dilution is generally not required. If necessary, add a small amount of thinner (5% or less), subject to local VOC and air quality regulations.

Safety Precautions

  • Irritating to eyes and skin. Vapors may cause respiratory allergies in sensitive individuals. May cause skin allergic reactions.
  • Avoid inhaling vapors. Do not contact eyes or skin. Wear protective equipment for ears, eyes, and skin.
  • To avoid potential respiratory irritation, use a suitable respirator.
  • Thoroughly wash skin after use. Wash contaminated clothing before reuse.
  • First Aid: In case of eye contact, immediately flush with clean water for at least 15 minutes. Remove contaminated clothing and shoes, and wash the affected skin with soap. If breathing stops, perform mouth-to-mouth resuscitation and seek medical attention immediately.

Declaration

The information listed in this document is reliable. Each provided value is a theoretical data calculated from the product formula. If needed, our company can inform the internal common measurement and determination methods for any of the above data. Since the usage conditions are beyond the control of the manufacturer, this information is not provided as a guarantee. The product is for professional use only. For any questions, please contact our company.

Our Technical Support and Customer Service Center is willing to provide you with product consulting and application technical services. Welcome to contact us by letter or phone.

Contact:

Wanhua Energysav Science & technology Group Co.,Ltd
Address: No. 56 Taiyuan Road, Yantai, Shandong, China
Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006
 
Subtitle text example

Title text example

Text after title text example
Additional information
Weight 25 kg