EP003 Epoxy Sealing Paint
WH-WX010 Water-based Rust Conversion Paint features easy application, strong penetrability, rapid rust conversion, and fast film drying, delivering excellent rust conversion and anti-corrosion performance. With low VOC content, it is safe and environmentally friendly.
SKU:
EP003 Epoxy Sealing Paint
Category: Corrosion Protection Coatings
Tags: Coating, Corrosion Protection Coatings
Description
Overview
WH-EP003 is a low-viscosity, two-component epoxy sealing paint specifically designed for application on damp concrete surfaces. It offers excellent permeability, strong adhesion, and superior wet-curing performance.
Product Features
- Exceptional wet-curing capability
- Outstanding permeability
- Easy to apply
- Ideal for sealing damp concrete surfaces before topcoat application, with the usage amount determined by the requirement of just saturating the concrete surface.
- Particularly suitable for high-performance paint systems and chemical-resistant coating combinations.
Technical Parameters
Item | Details |
---|---|
Binder Type/Pigment Type | Epoxy resin/modified amine curing agent |
Color | Transparent |
Surface Finish | High gloss |
Mixing Ratio | Weight ratio: 4 (binder) : 1 (curing agent) |
Curing Agent | CEP0030 |
Volume Solids Content | 50% |
Flash Point | 25°C |
Pot Life | 6 hours at 23°C |
Theoretical Spreading Rate | Dependent on the condition of the substrate to be coated |
Application Methods | Roller coating, brush painting, conventional spraying, or airless spraying |
Thinner | Material: TH003; Cleaning: TH003 |
VOC (Volatile Organic Compounds) | 458 g/L |
Drying Time | Touch dry: approx. 4 hours at 20°C; Hard dry: 7 days at 20°C |
Recoating Interval | Minimum: 4 hours at 23°C (73.4°F) |
Recommended Primer | None |
Substrate Temperature | At least 4°C (7°F) above the dew point |
Packaging | Two-component, 20 kg combined packaging |
Storage and Shelf Life | – Storage must comply with local regulations. |
- Store in a cool, well-ventilated place, away from excessive heat.
- Containers must be tightly sealed.
- Shelf life: 1 year. |
Application Guidelines
Surface Preparation
- The concrete must be cured for at least 28 days.
- The surface should be free of oil, loose particles, and other impurities.
- Can be applied on damp surfaces, but no standing water is allowed.
Mixing and Dilution
- As a two-component product, EP003 requires precise component ratio.
- Thoroughly mix all contents of each paint bucket together. A variable-speed power mixer is recommended. Avoid overmixing, as this will accelerate curing and shorten the product’s pot life.
- Add the curing agent and stir for 3 minutes.
- High temperatures will shorten the mixture’s pot life, while low temperatures will extend it.
- Dilution is generally not required. If necessary, add a small amount of thinner (5% or less), subject to local VOC and air quality regulations.
Safety Precautions
- Irritating to eyes and skin. Vapors may cause respiratory allergies in sensitive individuals. May cause skin allergic reactions.
- Avoid inhaling vapors. Do not contact eyes or skin. Wear protective equipment for ears, eyes, and skin.
- To avoid potential respiratory irritation, use a suitable respirator.
- Thoroughly wash skin after use. Wash contaminated clothing before reuse.
- First Aid: In case of eye contact, immediately flush with clean water for at least 15 minutes. Remove contaminated clothing and shoes, and wash the affected skin with soap. If breathing stops, perform mouth-to-mouth resuscitation and seek medical attention immediately.
Declaration
The information listed in this document is reliable. Each provided value is a theoretical data calculated from the product formula. If needed, our company can inform the internal common measurement and determination methods for any of the above data. Since the usage conditions are beyond the control of the manufacturer, this information is not provided as a guarantee. The product is for professional use only. For any questions, please contact our company.
Our Technical Support and Customer Service Center is willing to provide you with product consulting and application technical services. Welcome to contact us by letter or phone.
Contact:
Wanhua Energysav Science & technology Group Co.,Ltd
Address: No. 56 Taiyuan Road, Yantai, Shandong, China
Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006
More Similar Items
The Largest MDI Manufacturer and Polyurethane Raw Material Supplier
Subtitle text example
Title text example
Text after title text example
Additional information
Weight | 25 kg |
---|