WB061 Silicone Acrylic Top Coat Varnish
061 silicone-acrylic topcoat clear coat is a water-based topcoat clear coat specially launched by our company based on years of professional exterior wall construction experience, specifically designed to be compatible with Wanhua Texture Paint and real stone paint. This product features excellent waterproof white and hydrophobic properties. While effectively inhibiting the adhesion and penetration of pollutants, it can also self-clean the paint film through rainfall, ensuring that the true color and texture effects of texture paint and real stone paint can be perfectly presented for a long time.
SKU:
WB061 Silicone Acrylic Top Coat Varnish
Category: Architectural Coatings
Tags: Coating, Architectural Coatings
Description
Overview
WH-WB061 Silicone Acrylic Top Coat Varnish is specially developed by our company based on years of professional exterior wall construction experience. It is a water-based top coat varnish designed for matching Wanhua texture paints and real stone paints. This product features excellent waterproofing and water-repellent properties, effectively inhibiting the adhesion and penetration of pollutants while enabling the paint film to self-clean through rainfall, thus maintaining the bright and fresh appearance of the stone paint effect. Its outstanding weather resistance ensures the paint film provides long-lasting protection and decorative effects without powdering, fading, or peeling. Prepared with silicone acrylic emulsion, it enhances the water-repellent property of the paint film and effectively improves its stain resistance. It can prevent the growth of mold and algae even in humid weather.
Recommended Applications
Suitable for the decoration and renovation of various masonry structures and gypsum board walls, as well as exterior wall insulation systems. It is particularly suitable for supporting texture coatings and real stone paints.
Physicochemical Properties
Item | Description |
---|---|
Main Components | Pure acrylic polymer, pure organosilicon resin, water, additives |
Drying Time | Touch-dry for a single coating of standard thickness (14%) at 25°C and 50% RH: 0.5–1 hour |
Theoretical Film Thickness | Wet film: approximately 60 microns (one coat); Dry film: approximately 7.5 microns (one coat) |
Density | Approximately 1.02 g/ml |
Application Guidelines
Item | Description |
---|---|
Application Methods | Brush painting, roller painting, spraying |
Recoating Interval | Minimum: 2 hours (20°C/68°F, R.H.65%) (Drying time varies with temperature and humidity); Maximum: unlimited |
Surface Preparation | The substrate must be fully dry, clean, free of oil and other attachments, with a pH value below 10 and wall moisture content <10%. The substrate should also be smooth, solid, and free of defects. |
Application Conditions | Construct under normal and good conditions. |
Precautions
- Store the product in a cool, dry warehouse protected from direct sunlight, with a storage temperature not lower than 0°C.
- Do not apply at temperatures below 5°C or relative humidity above 85%.
- Do not mix with other paints, organic solvents, or powders.
- The shelf life of this product is one year at 20°C/68°F.
- Read the usage instructions before construction.
- Stir the paint thoroughly after opening the can.
- Add an appropriate amount of water as instructed if necessary; do not over-dilute.
- Avoid excessive paint on the brush or roller during construction.
- Use up the opened product as soon as possible.
Declaration
The information listed in this document is reliable. Each provided value is calculated as theoretical data from the product formula. If required, our company can inform you of the internal common measurement and determination methods for any of the above data. Since the usage conditions are beyond the control of the manufacturer, this information is not provided as a guarantee. The product is for professional use only. In case of any questions, please contact our company.
Our Technical Support and Customer Service Center is willing to provide you with consultations and application technical services regarding the product. Welcome to contact us by letter or phone.
Contact:
Wanhua Energysav Science & technology Group Co.,Ltd
Address: No. 56 Taiyuan Road, Yantai, Shandong, China
Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006
More Similar Items
The Largest MDI Manufacturer and Polyurethane Raw Material Supplier
Subtitle text example
Title text example
Text after title text example
Additional information
Weight | 25 kg |
---|