WB562 Water-based Spray Embossed Paint

WB562 water-based spray dot relief paint is composed of acrylic copolymer emulsion, pigments, fillers and additives. This product can create beautiful three-dimensional relief concave and convex patterns. The paint film is hard and firm, and it has excellent anti-cracking and decorative effects on the wall surface

Overview & Recommended Applications

WH-WB562 Water-based Spray Embossed Paint is formulated with acrylic copolymer emulsion, pigments, fillers, and additives. This product creates beautiful three-dimensional embossed concave-convex patterns, featuring a hard and firm paint film that provides excellent anti-cracking and decorative effects for walls. When used in conjunction with Unico Sealing Primer, it demonstrates optimal interlayer adhesion and protective performance. It is suitable for the decoration and renovation of various masonry structures and gypsum board walls, as well as external wall insulation systems.

Physical and Chemical Properties

Item	Details
Paint Surface & Color	Matte finish, white (other colors refer to the color card).
Theoretical Coverage	– Large patterns: 0.45-0.5 m²/kg – Medium patterns: 1.0-1.2 m²/kg – Small patterns: 1.6-2.0 m²/kg (Actual coverage may vary depending on application methods and surface roughness/porosity.)
Flash Point	None
Density	1.8 g/ml
Tool Cleaning	Clean with water
Recoating Interval	– Minimum: 1 hour (20°C/68°F, R.H.65%) – Maximum: No limit

Surface Preparation

The substrate must be fully dry, clean, oil-free, and free of other attachments.
The pH value must be below 10.
The structure should be flat, solid, and free of defects.
For walls with old paint films, remove powdery and peeling coatings, rinse thoroughly with water, and allow to dry before application.

Application Conditions

Apply under normal and favorable construction conditions.

Precautions

Store in a cool, dry warehouse protected from direct sunlight, with a storage temperature not lower than 0°C.
Do not apply at temperatures below 5°C or relative humidity above 85%.
Do not mix with other paints, organic solvents, or powders.
The shelf life is one year at 20°C/68°F.
Read the application instructions before construction.
Thoroughly stir the paint in the can after opening.
Add a proper amount of water as specified if needed; do not over-dilute.
Avoid excessive paint absorption on brushes or rollers during application.
Use up the opened product as soon as possible.

Declaration

The information listed in this document is reliable. Each value provided is a theoretical data calculated from the product formula. If required, our company can inform you of the internal common measurement and determination methods for any of the above data. Since the usage conditions are beyond the control of the manufacturer, this information does not constitute a guarantee. The product is for professional use only. For any questions, please contact our company.
Our Technical Support and Customer Service Center is willing to provide you with product consultation and application technical services. Welcome to contact us by letter or phone.

Contact:

Wanhua Energysav Science & technology Group Co.,Ltd

Address: No. 56 Taiyuan Road, Yantai, Shandong, China

Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006

More Similar Items

The Largest MDI Manufacturer and Polyurethane Raw Material Supplier

Subtitle text example

Title text example

Text after title text example

Thermal Insulation of Facades

Interior Insulation

Roofing Insulation

Flooring Material

Wall System & Roof System

Low-temperature Building

Modular Building

Pipe Insulation

Automotive

Marine and Ships

Insulation and Seepage-proofing of Dam Body

Corrosion Protection Coatings

Fireproof Coatings

Architectural Coatings

Floor Coatings

Polyurea Coating