WB001 Water-based Transparent Alkali-resistant Sealing Primer

Product Overview and Recommended Applications

Physical and Chemical Properties

Construction Guidelines

• Application Methods：Brush coating, roller coating, spray coating.
• Tool Cleaning：Clean construction tools with clean water.
• Recoating Time：Minimum interval 2 hours (construction conditions: temperature 20°C/68°F, relative humidity 65%, drying time varies with temperature and humidity); maximum interval unlimited.
• Surface Preparation：The substrate to be coated must be fully dry, clean, free of grease and other attachments; substrate pH value shall be less than 10, wall moisture content less than 10%; the surface shall be smooth, solid, and free of structural defects.
• Construction Conditions：Construction is recommended under normal and good environmental conditions.

Precautions

1. Store the product in a cool, dry, and dark warehouse, with the storage temperature not lower than 0°C.
2. Do not construct when the ambient temperature is below 5°C or the relative humidity is higher than 85%.
3. Strictly prohibit mixing with other paints, organic solvents, or powder materials.
4. The shelf life of the product is one year (storage temperature 20°C/68°F).
5. Please read the product instruction manual carefully before construction.
6. Stir the paint thoroughly after opening the can to ensure uniform composition.
7. If dilution is required, add an appropriate amount of clean water as specified, and never over-dilute.
8. Avoid excessive paint absorption by brushes or rollers during construction.
9. Use the opened product as soon as possible to avoid performance degradation due to long-term storage.

Declaration