WB164 Exterior Wall Waterborne Fluorocarbon Paint

Overview

Recommended Applications

Physical and Chemical Properties

Construction Guidelines

• Repainting Interval
  • Minimum: 4 hours (20°C/68°F, R.H.65%)
  • Maximum: Unlimited
• Surface Preparation
  The substrate must be fully dry, clean, free of oil, and other attachments. The pH value must be below 10. The structure should be flat, solid, and free of defects. As a topcoat for sealing primer, relief primer, or putty, it should be applied after the primer or putty is hard-dried. For walls with old paint films, powdery and peeling films should be removed, washed thoroughly with clean water, and dried before application.
• Construction Conditions
  Construct under normal and good conditions.

Precautions

1. Store the product in a cool, dry warehouse away from direct sunlight, with a storage temperature not lower than 0°C.
2. Do not construct when the temperature is below 5°C or the relative humidity exceeds 85%.
3. Do not mix with other paints, organic solvents, or powders.
4. The shelf life of this product is one year (20°C/68°F).
5. Read the instruction manual before construction.
6. Stir the paint thoroughly after opening the can.
7. Add an appropriate amount of water as specified if necessary; do not over-dilute.
8. Avoid excessive paint on brushes or rollers during construction.
9. Use the opened product as soon as possible.

Declaration