Moisture-Proof And Vapor-Proof Coating For Cold Storage (Two-Component)

Product Introduction

Performance Characteristics

1. Uniform film formation.
2. High solid content, solvent-free.
3. Good compatibility with polyurethane foam.
4. Good chemical resistance.
5. Good adhesion.

Product Usage

Physical and Chemical Properties

Precautions for Use

Construction Conditions

1. Humidity Range: The moisture content of the concrete base surface is less than 10%.
2. Ventilation Conditions: Ensure good ventilation at the construction site.

Construction Method

Construction Parameters

Packaging Specifications

Storage, Transportation Conditions and Shelf Life

1. Storage and Transportation Conditions: The two-component environmentally friendly cyanogel for cold storage moisture-proof and vapor-barrier coating should be stored in a sealed, dry, cool, and well-ventilated environment at 15 – 35°C, avoiding high temperatures and open flames. During transportation, stack the materials steadily, and ensure that the truck compartment is dry, closed, moisture-proof, and freeze-proof.
2. Shelf Life: From the production date, under the required storage conditions, the shelf life of the product in its original packaging is 3 months. After 3 months, it can be used continuously if it passes the inspection.

Safety Precautions

1. Read the construction instructions and warning labels on the packaging containers carefully before use.
2. Ensure good ventilation at the construction site and prohibit open flames.
3. When constructing, it is recommended to wear necessary protective equipment (gloves, protective glasses, work clothes, etc.).
4. In case of splashing on the skin or eyes, immediately rinse with clean water for at least 15 minutes, and seek medical attention if necessary.
5. Under normal construction conditions, the dry film is non-toxic, so you can use it with confidence.
6. For detailed information on toxicity, safety, and first aid, please refer to the Material Safety Data Sheet (MSDS) of this product.

Fire and Explosion Hazards

1. This product is not a flammable liquid, explosive, oxidizer, corrosive, toxic, or radioactive hazardous material during storage and transportation, and it does not belong to hazardous goods.
2. Fire-fighting Media: Carbon dioxide, foam, or chemical dry powder fire extinguishers can be used for fire-fighting. When there are no other fire extinguishers available, a large amount of foggy water can be sprayed. Once the fire is extinguished, clean up the spilled materials (refer to the leakage and spillage handling section).
3. Fire-fighting Procedures: Normal protection.

Leakage and Spillage Handling

1. Small amounts of leaked and spilled materials can be washed away with water. In case of a large leakage, collect and recycle the materials, and wash the contaminated ground with water or detergent. The disposal of waste compound materials must comply with local government environmental protection regulations.
2. For more information, please refer to the safety technical specification of our company’s products or contact our company’s customer service center.