ES006 Solvent-Free Moisture-Resistant Concrete Primer
ES006 is a 100% solid-content solvent-free concrete primer applicable to both dry and damp concrete surfaces. It features excellent adhesion and can be directly applied to moist substrates, making it an ideal choice for various concrete surface treatments.
SKU:
ES006 Solvent-Free Moisture-Resistant Concrete Primer
Category: Corrosion Protection Coatings
Tags: Coating, Corrosion Protection Coatings
Description
Overview
WH-ES006 is a 100% solid-content solvent-free concrete primer applicable to both dry and damp concrete surfaces. It features excellent adhesion and can be directly applied to moist substrates, making it an ideal choice for various concrete surface treatments.
Product Characteristics
- High Adhesion: Ensures strong bonding to concrete surfaces, even when slightly damp.
- Solvent-Free: Contains zero volatile organic compounds (VOCs), aligning with environmental standards.
- Moisture Tolerance: Suitable for construction on 潮湿 (damp) surfaces without compromising performance.
Recommended Applications
- Priming for both dry and damp concrete substrates in industrial floors, basements, tunnels, and other concrete structures.
Technical Specifications
Item | Details |
---|---|
Binder/Pigment Type | Epoxy resin/modified amine |
Color | Transparent |
Surface Finish | Flat |
Mix Ratio (by weight) | 10 (base material) : 6 (curing agent) |
Curing Agent | CES0060 |
Density | Approx. 1.05 kg/L |
Volume Solids | 100% |
Flash Point | >100°C |
Pot Life | 0.5 hours (@23°C) |
Theoretical Coverage | 10 m²/L (based on 100μm dry film thickness) |
Film Thickness | Wet film: 100μm; Dry film: 100μm |
Application Methods | Brush, roller, airless spraying, air spraying |
Airless Spray Nozzle | 0.53mm |
Airless Spray Pressure | 17.5 MPa |
Diluent | TH003 (≤5% by volume) |
Tool Cleaning | TH003 |
Drying Time (@23°C) | – Surface dry: 2 hours – Touch dry: 4 hours – Full cure: 7 days |
Recoat Interval | Refer to construction guidelines |
Recommended Primer | Self (WH-ES006) |
Ambient Temperature | Minimum 5°C |
Packaging | Two-component kit, 25.6 kg combined packaging |
Storage & Shelf Life | Store in cool, well-ventilated areas, away from high temperatures. Tightly seal containers. Shelf life: 1 year. |
Construction Guidelines
Surface Preparation
- Ensure the concrete substrate is structurally sound, free of loose particles, oil, and contaminants.
- Suitable for surfaces cleaned by high-pressure water or mechanical methods.
- Can be applied to damp surfaces, but free-standing water must be removed.
Mixing & Dilution
- Mixing:
- Stir the base material thoroughly for ≤2 minutes until uniform.
- Gradually add the curing agent and mix for 3 minutes using a variable-speed power mixer.
- Avoid overmixing to prevent accelerated curing and reduced pot life.
- High temperatures shorten the pot life; low temperatures extend it.
- Dilution: Use TH003 diluent if needed, with a maximum addition of 5%.
Application
- Apply via brush, roller, airless spraying (0.53mm nozzle, 17.5 MPa pressure), or air spraying.
- Recoat Interval: Minimum 16 hours, maximum 7 days after initial application.
Safety Precautions
- Hazards: May cause eye and skin irritation. Vapors may trigger respiratory allergies in sensitive individuals. Risk of skin sensitization.
- Protective Measures:
- Wear protective gear (glasses, gloves, respiratory mask) during application.
- Avoid inhalation of vapors and direct contact with eyes/skin.
- After use, wash exposed skin thoroughly. Launder contaminated clothing before reuse.
- First Aid:
- If inhaled and breathing stops, perform mouth-to-mouth resuscitation and seek immediate medical attention.
- In case of eye contact, flush with clean water for at least 15 minutes and consult a physician.
Declaration
The information herein is based on reliable data and theoretical calculations from product formulations. Specific testing methods can be provided upon request. As usage conditions are beyond the manufacturer’s control, this information does not constitute a warranty. The product is intended for professional use only. For inquiries, contact our Technical Support and Customer Service Center.
Contact:
Wanhua Energysav Science & technology Group Co.,Ltd
Address: No. 56 Taiyuan Road, Yantai, Shandong, China
Fax: 400-059-1116 | Tel: +86-17761309662 | Postal Code: 264006
More Similar Items
The Largest MDI Manufacturer and Polyurethane Raw Material Supplier
Subtitle text example
Title text example
Text after title text example
Additional information
Weight | 25 kg |
---|