WANNATE HT-90B

 

WANNATE® HT-90B (hexamethylene diisocyanate-based polyisocyanate solution) is an aliphatic polyisocyanate solution. It consists of 90% HDI trimer and 10% butyl acetate. It is a colorless to pale yellow transparent liquid with an aromatic odor at room temperature.

 

This product belongs to the isocyanurate category:

 

 

As a raw material for polyurethane production, WANNATE® HT-90B is mainly used as a curing agent component for light-resistant two-component polyurethane coatings. The coatings exhibit excellent chemical resistance, weatherability, outstanding gloss retention, and superior mechanical properties. Ideal co-reactants include polyacrylates, polyester polyols, and alkyd resins.

 

Coating systems formulated with WANNATE® HT-90B are suitable for air-drying or baking applications, including automotive OEM coatings, automotive refinish, transportation vehicles, industrial products, and plastic finishing.

 

 

Store in a cool, dry, and well-ventilated warehouse. Keep away from ignition sources and heat. Keep containers tightly sealed. Store separately from oxidizing agents, acids, alkalis, alcohols, and food chemicals, and avoid mixed storage.

 

WANNATE® HT-90B can be diluted with ester, ketone, and aromatic solvents such as ethyl acetate, butyl acetate, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, etc. It generally has good miscibility with the above solvents, but the storage stability of the prepared solution must be tested. Only urethane-grade solvents (water content < 0.05%, no active groups such as hydroxyl or amino) shall be used. Aliphatic hydrocarbons are not suitable as solvents.

 

WANNATE® HT-90B shall not be diluted to a solid content below 40%. Solutions with low binder content may develop turbidity and precipitation after long-term storage.

 

WANNATE® HT-90B is generally compatible with aliphatic polyisocyanates, aromatic polyisocyanates, polyether polyols, and polyacrylates; however, the compatibility of the formulated solution should be tested.

 

This product is sensitive to moisture, and high-temperature storage will cause an increase in viscosity and color number. When stored in the original unopened container under cool and dry conditions at 0~30℃, the shelf life is 15 months.

 

For safety and environmental protection information, please refer to the product Safety Data Sheet (SDS) or contact our Customer Service Center.

 

 

The data and specifications provided herein are based on our current technical knowledge and practical experience for reference only. The actual guaranteed specifications shall be subject to the Quality Certificate or supply contract. Users are responsible for testing the purchased products to verify suitability for their intended processes and applications to achieve the desired results. Further applications and processing of our products are beyond our control. Therefore, our liability is limited to the portion of the products delivered and used by you, and we shall not be liable for indirect losses caused during the production process using our products as raw materials. Our Marketing Department Technical Support and Customer Service Center is ready to provide product consultation and application technical services. Welcome to contact us via letter or call.