HT761 Silicone Heat-resistant Aluminum Powder Paint

Overview

Product Features

• High Temperature Resistance: Withstands up to 600°C after curing.
• Multi-scenario Application: Designed for thermal equipment requiring heat protection.
• Diverse Construction Methods: Supports brush, roller, conventional spray, and airless spray applications.

Recommended Uses

• Thermal pipelines and exhaust systems
• Chimneys and furnace components
• High-temperature machinery surfaces

Technical Parameters

Application Guidelines

Surface Preparation

• Steel Substrates: Blast-clean to Swedish standard SIS 055900 Sa2.5.
• Pre-blasting Requirements: Ensure surfaces are free of oil, moisture, and contaminants.
• Overcoating on Existing Coatings:
  • Inorganic zinc coatings: Must be dry and free of zinc salts.
  • Metal-sprayed (aluminum/zinc) surfaces: Must be dry and clean.

Application Notes

• Film Thickness Control: Avoid excessive film thickness to prevent blistering at high temperatures. Use TH007 diluent to achieve lower dry film thickness.
• Curing Requirements: Full curing requires ≥200°C for 5 days; otherwise, the coating may retain thermoplastic properties.
• Total Film Thickness for High-Temperature Use: ≤75 μm dry film thickness.
• Heat Exposure: Do not expose to heat until fully dried (minimum 24 hours at 20°C).

Safety Measures

• Follow warning labels on packaging.
• Use in well-ventilated environments.
• Avoid ingestion, inhalation of paint mist, or skin/eye contact.
• For skin contact: Clean immediately with suitable cleanser and soapy water.
• For eye contact: Flush thoroughly with water and seek medical attention.

Declaration