HT310 Pearlescent Blue High-Temperature Resistant Paint

Technical Specifications

Application Guidelines

Surface Preparation

• Steel Substrates: Blast-clean to Swedish Standard SIS 055900 Sa2.5 prior to application.
  – Key Requirements:
  • Remove all grease, moisture, and contaminants before blasting.
  • For surfaces pre-coated with inorganic zinc primers, ensure they are dry and free of zinc salts.
  • For aluminum/zinc-sprayed steel, ensure surfaces are dry and free of debris.

Painting Instructions

• Film Thickness Control: Avoid excessive film buildup to prevent blistering during thermal exposure.
  – Dilute with TH007 thinner to achieve lower dry film thickness (DFT).
• Curing Requirements:
  • Full curing requires exposure to >200°C for at least 5 days; otherwise, the coating may retain thermoplastic properties.
  • Total DFT of the coating system should not exceed 75 μm for high-temperature applications.
• Post-Application Care: Avoid heat exposure until the coating is fully dry (minimum 24 hours at 20°C).

Safety Precautions

• Read all warning labels on the packaging before use.
• Use in well-ventilated areas to minimize vapor exposure.
• Avoid ingestion, inhalation of paint mist, and direct skin contact.
• In case of skin contact, wash immediately with soap and water. If paint enters eyes, flush with water and seek medical attention promptly.

Disclaimer