WN167 Water-Based Low-Odor Formaldehyde-Removing Healthy Paint

Overview

Recommended Applications

• Decorating and protecting common interior base walls, such as plastered surfaces and gypsum board surfaces.
• High-end healthy home decoration in green and eco-friendly projects.
• Decoration and coating for 场所 like hospitals and schools.

Theoretical Film Thickness

• Touch-Dry: 0.5–1 hour
• Wet Film: Approximately 100 microns (per coat)
• Dry Film: Approximately 60 microns (per coat)

Application Guidelines

• Application Methods: Brush painting, roller painting, spray painting
• Diluent: Clean water (maximum volume: 30%)
• Tool Cleaning: Clean water
• Theoretical Coating Area: 8–10 m²/kg
• Recoating Interval:
  • Minimum: 2 hours (at 20°C/68°F, R.H.65%) (Drying time varies with temperature and humidity.)
  • Maximum: No limit

Surface Preparation

• The substrate must be smooth, solid, clean, and dry.
• For newly plastered walls, allow approximately 7 days of air-drying before painting.
• For surfaces with loose, powdery, or peeling old paint, thoroughly remove all defective coatings.
• For mold-infested walls, scrub repeatedly with bleach solution to eliminate mold completely, rinse with clean water, and ensure full dryness before painting.

Application Conditions

• Perform construction under normal and favorable conditions.

Precautions

1. Store the product in a cool, dry warehouse protected from direct sunlight, with a storage temperature not lower than 0°C.
2. Do not apply at temperatures below 5°C or relative humidity above 85%.
3. Do not mix with other paints, organic solvents, or powders.
4. The shelf life of this product is one year (at 20°C/68°F).
5. Read the usage instructions carefully before construction.
6. Stir the paint thoroughly after opening the can.
7. Add an appropriate amount of water as instructed; do not over-dilute.
8. Avoid excessive paint absorption on brushes or rollers during application.
9. Use up the opened product as soon as possible.

Declaration