Polyurethane rigid foam spray combination
B1, B2 Grade Polyurethane Rigid Foam Spray Combination Material For Building Floors
Back to products
B1 grade polyurethane rigid foam spray combination material
B1 Grade Polyurethane Rigid Foam Spray Combination Material For Building Interior Walls
Awaiting product image
Click to enlarge
Gypsum-Based Self-Leveling Mortar
Gypsum-Based Self-Leveling Mortar
Gypsum-Based Self-Leveling Mortar

Gypsum-Based Self-Leveling Mortar

This product is made of high-strength building gypsum as raw material and refined with polymer components. It can completely solve problems such as ground cracking and hollowing, poor sound insulation, etc. The product has high construction efficiency and has functions such as thermal insulation, sound insulation, and heat storage.

Inquiry Now
Name *
Email *
Enter enquiry subject *
Message *
WhatsApp
SKU: Gypsum-Based Self-Leveling Mortar Categories: , Tags: ,
Description

Product Introduction

This product is made from high-strength building gypsum as raw material, supplemented by polymer components. It can completely solve problems such as ground cracking, hollowing, and poor sound insulation. The product features high construction efficiency and has functions of heat preservation, sound insulation, and heat storage.

Construction Method

  1. When using this product, the strength of the base course must meet the requirements. There should be no defects such as sanding, hollowing, or looseness. If the strength of the base course does not meet the requirements, it must be strengthened first. Before construction, the base surface must be dry, clean, free of oil stains and floating dust.
  2. After the base course treatment is completed, apply a special water-based interface agent. Do not miss any part during brushing.
  3. Before mixing, add the specified amount of clean water into the container. Then, slowly pour in the powder according to the usage ratio. Use a mixer to fully stir it into a uniform slurry, and then spread it on the treated base surface. A toothed trowel can be used to assist in leveling. Mixing and spreading can also be carried out by mechanical construction methods.
  4. After spreading, when no more surface bubbles are generated, use an anti-foaming roller to eliminate the surface bubbles.

Performance Indicators

Test ItemsTest Data
30-min Flowability/mm≥140
24-h Flexural Strength/MPa≥2.0
28-d Dry Flexural Strength/MPa≥5.0
24-h Compressive Strength/MPa≥6.0
28-d Dry Compressive Strength/MPa≥20.0
28-d Drying Tensile Bond Strength/MPa≥1.0
Dimensional Change Rate/%-0.05~+0.05
Impact ResistanceNo cracking or detachment from the bottom plate

 

The values provided in this document are typical test values. The specific data may vary slightly due to environmental conditions. For our company's products, the listed data has no legal binding force.

Precautions

  1. The single-pass construction thickness should be between 5 - 30mm.
  2. It is not suitable for construction under direct sunlight or in a strong wind environment.
  3. The construction temperature should be between 5 - 35°C, and the humidity should be less than 80%.
  4. Do not add any materials without permission during use. It is strictly prohibited to add water and stir the slaked slurry again after initial setting.
  5. The mixed materials should be completely used for construction within 30 minutes.

 

Before the formal construction of the project, the buyer must conduct tests in an environment consistent with the construction conditions to ensure the reliability of the materials used in this specific project. During formal construction, it is regarded that the buyer has recognized the qualified performance inspection of the product. If the above operations are not followed, all responsibilities shall be borne by the buyer.

Packaging Specification

25±0.5kg/bag

Storage Precautions

This product should be stored in a cool, dry, and ventilated place. Be careful to prevent damage during transportation and loading.

Shelf Life

From the date of production, under the specified storage conditions, the shelf life is 6 months.

Safety Precautions

Direct contact may cause moderate eye irritation and mild skin irritation, and may cause skin allergies. Seek medical attention immediately and take symptomatic treatment measures.
If it gets into the eyes, immediately rinse with clean water and seek medical attention if necessary. If swallowed, seek medical attention immediately for symptomatic treatment.

Fire and Explosion Hazards

This product is not a flammable liquid, explosive, oxidizer, corrosive, toxicant, or radioactive hazardous material during storage and transportation. It is not a hazardous product.
Fire-fighting Media: Carbon dioxide, foam, or chemical dry powder fire extinguishers can be used for fire-fighting. When there is no other fire extinguishing agent available, a large amount of atomized water can be sprayed. Once the fire is extinguished, the spilled materials should be cleaned up (see Leak and Spill Treatment).
Fire-fighting Procedures: Normal protection.

Leak and Spill Treatment

Small amounts of leaked or spilled materials can be washed away with water. In case of a large spill, collect and recycle the materials, and wash the contaminated ground with water or detergent. The disposal of waste composite materials must comply with local government environmental protection regulations.

 

For more information, please refer to our company's product safety technical specification or contact our company's customer service center.

 

The indicators and data given in this document are based on our current technical knowledge and practical experience and are for reference only. The specific guarantee indicators shall be subject to the provisions of the quality assurance certificate or supply contract. Users are responsible for testing the products purchased from our company to verify whether they are suitable for the respective intended processes and uses and achieve the intended purpose. The further application and processing of our company's products are beyond our control. Therefore, our responsibility for the products provided is limited to the part delivered by us and used by you. We do not bear the indirect losses caused by the production process using our company's products as raw materials. Our company's technical support and customer service center is willing to provide you with consultation and application technology services related to the products. Welcome to contact us by letter or phone.
 
Contact person: Vivin Yi
WhatsAPP: +86 17761309662
Email: wanhuachemical@outlook.com
Tel: +86 17761309662
Wechat: yivonnie

Related products

Polymer Bonding Mortar
Polymer Bonding Mortar

Polymer Bonding Mortar

, ,
Polymer Facing Mortar
Polymer Facing Mortar

Polymer Facing Mortar

, ,
Placeholder
Placeholder

Low Temperature Repair Mortar WANSHIELD®

Placeholder

Abrasion Resistant Epoxy Mortar for Water Conservancy

,
Water - based Polyurethane Mortar Floor Coating
Mortar Floor Coating

WANSHIELD®63120 Waterborne Polyurethane Mortar Floor Coating

Colorful flooring (2)
Colorful flooring (1)

WANSHIELD®63122 Colored – Sand Water – based Polyurethane Mortar Flooring System