WANNATE IT-170BS

 

 

Store in a cool, dry and well-ventilated area. Keep away from incompatible materials and food containers. Store in the original container and keep it tightly sealed. No smoking, open flames or ignition sources. Protect containers from physical damage.

 

Avoid contact with water, alcohols, strong bases, metal compounds or detergent solutions. This material reacts with water to generate a large amount of foam, carbon dioxide and heat. Foaming in a confined space may cause pressure build-up. Isocyanates may corrode and embrittle certain plastics and rubbers.

 

WANNATE® IT-170BS can be diluted with polar solvents such as esters, ketones and ether esters, e.g., butyl acetate, methyl ethyl ketone, propylene glycol methyl ether acetate, as well as aromatic hydrocarbons. It generally has good compatibility with the solvents listed above, but the storage stability of the prepared solution should be tested. Only urethane-grade solvents (water content < 0.05%, free of reactive groups such as hydroxyl and amino groups) shall be used.

 

Stable solutions with a minimum solid content of 20% can be prepared by diluting WANNATE® IT-170BS with xylene, toluene or high-boiling aromatic hydrocarbons such as naphtha 100 or aromatic hydrocarbon mixtures. Aliphatic solvents should not be added if extended storage stability of the diluted solution is required. However, WANNATE® IT-170BS is compatible with aliphatic solvents to a certain extent and can therefore be incorporated into coating systems containing aliphatic solvents.

 

In general, WANNATE® IT-170BS is compatible with the following products: aliphatic polyisocyanates (e.g., WANNATE® HT-100, HB-100), aromatic polyisocyanates, polyester polyols, polyacrylates and alkyd resins. Compatibility testing must be performed before blending.

 

This product is sensitive to moisture. The shelf life is 6 months when stored in the original sealed container under cool and dry conditions at 0–30°C.

 

General Information:Storage above 30°C may cause an increase in viscosity and color number. Storage below 0°C may lead to crystal precipitation. Such solidification is reversible by brief heating and does not affect product quality.

 

For safety and environmental information, please refer to the Safety Data Sheet (SDS) of our product or contact our Customer Service Center.

 

 

The data and specifications provided herein are based on our current technical knowledge and practical experience for reference only. The guaranteed specifications shall be subject to the Quality Certificate or supply contract. Users are responsible for testing the product to verify its suitability for their intended processes and applications to achieve the desired results. Further application and processing of our products are beyond our control. Therefore, our liability is limited to the portion of the product delivered by us and used by you, and we shall not be liable for indirect losses incurred during the production process using our products as raw materials.

 

Our Marketing Department, Technical Support and Customer Service Center are ready to provide product consultation and application technical services. Welcome to contact us via letter or telephone.