Inorganic Flame-Retardant Fireproof Coating AquaTop 910
AquaTop 910 water-based inorganic flame-retardant coating uses inorganic minerals as the primary binder. It chemically reacts with the mineral matrix of the substrate to form a water-and acid-resistant silicate layer. Through silicification with the mineral substrate, it generates insoluble silicate compounds, permanently bonding with the base layer. This results in excellent water resistance, acid/alkali resistance, dust resistance, and fire-retardant properties.
Cable Fire Retardant Coating DL-WH
DL-WH cable fireproof coating is an advanced water-based intumescent coating formulated with terpolymer emulsion, flame retardants, and plasticizers. Designed specifically for wires and cables, it offers superior fire resistance and environmental compliance. representing an advanced solution in the industry.
Solvent-Free Epoxy Intermediate Coating for Floor Coating WANSHIELD®62208
WANSHIELD®62208 solvent – free epoxy intermediate coating is a solvent – free, high – solid – content, and thick – coat – applicable two – component floor coating. It can increase the thickness and sealing property of the coating system. When used with quartz sand during construction to form mortar, it can significantly enhance the mechanical strength of the coating system. Additionally, when adding inorganic aggregates such as quartz powder, it can be used as a joint – filling and repair material to improve the flatness of the ground.
Anti – static Epoxy Self – leveling Topcoat for Floor Coating
This solvent-free, two-component epoxy floor coating incorporates uniformly dispersed high-performance conductive fibers, ensuring stable and durable anti-static properties (surface resistance: 10⁴–10⁹ Ω). Customizable to project requirements, it effectively prevents electrostatic discharge (ESD) and electromagnetic interference (EMI).
Polyurea Waterproof Coating For Environmental Engineering
Polyurea waterproof coating for environmental engineering effectively addresses waterproofing, anti-seepage, and anti-corrosion issues in substrates such as concrete and steel structures, thereby prolonging service life.
Wanefoam®7000 Pouring-Type Polyurethane Rigid Foam Insulation Pipe Composite Material (141B) For Pipes
WANEFOAM®7000 series is a polyurethane rigid foam insulation pipe composite material for casting. Its foaming agent is HCFC-141b. The foam obtained by using WANEFOAM®7000 series composite materials in combination with WANNATE®2208 has fine pores, strong adhesion, uniform density distribution, good fluidity and mold filling properties.
Wanefoam®7020 Spray-Coiled Polyurethane Rigid Foam Insulation Pipe Composite Material For Pipes
The foaming system of spray-coiled polyurethane rigid foam insulation pipe composite material utilizes water + physical blowing agents. When combined with WANNATE®2208, the resulting foam exhibits fine foam cell structure, excellent bonding strength with steel pipes, uniform density distribution, and good dimensional stability.
Wanefoam®7010 Pouring-Type Polyurethane Rigid Foam Insulation Pipe Composite Material (Water-Blown) For Pipes
Pouring-type polyurethane rigid foam insulation pipe composite material (water-blown) uses water as the sole blowing agent without other auxiliary foaming agents. When combined with WANNATE®2208, the resulting foam exhibits fine cell structure, strong adhesion, uniform density distribution, along with excellent flowability and mold-filling properties.
Pouring-Type Polyurethane Rigid Foam Insulation Pipe Composite Material (141B)
Pouring-type polyurethane rigid foam insulation pipe composite material (141B) is designed for pouring applications. It utilizes the ultra-low thermal conductivity and environmentally friendly blowing agent. When combined with WANNATE®2208, the resulting foam exhibits fine cell structure, strong adhesion, uniform density distribution, along with excellent flowability and mold-filling properties.
Polyurea Waterproof Coating For Urban Utility Tunnels
Polyurea waterproof coating for urban utility tunnels effectively addresses waterproofing, anti-seepage, and anti-corrosion issues in substrates such as concrete and steel structures, thereby prolonging service life.
WANSHIELD®62238 Solvent-Free Epoxy Self-Leveling Topcoat for Floor Coating
WANSHIELD®62238 is a high-performance, two-component, solvent-free epoxy self-leveling floor coating. Component A consists of epoxy resin, eco-friendly additives, and pigments, while Component B is a yellowing-resistant amine curing agent. The coating delivers an exceptionally smooth, glossy, and mirror-like finish with outstanding resistance to chemicals (acids, alkalis, salts, oils), abrasion, compression, and impact. Ideal for environments demanding superior cleanliness, aesthetics, and hygiene.
High Temperature Resistant Sealing Gel Material (Fire Resistant) Type 2
High temperature resistant sealing gel material (fire prevention and extinguishing) type 2 is a filling fire extinguishing material for coal mines. It contains components A and B. The two components are mixed in a volume ratio of 1:1 and then foamed and sprayed. The reaction process does not release heat. The foam formed has a high water content and good flame retardancy. It can be used in the fields of filling and sealing of coal mines, prevention of fire and spontaneous combustion, etc.
