WANNATE HB-75MX

20 kg steel drum, 60 kg steel drum, 215 kg steel drum, IBC tank, ISO tank. Customized packaging is available upon customer request.

 

Mass fraction of HDI monomer: < 0.5%Store in a cool, dry and well-ventilated warehouse. Keep away from fire and heat sources. Keep containers tightly sealed. Store separately from oxidizing agents, acids, alkalis, alcohols and food chemicals, and avoid mixed storage.

 

WANNATE® HB-75MX can be diluted with ester solvents, ketone solvents and aromatic hydrocarbon solvents, such as ethyl acetate, butyl acetate, acetone, methyl ethyl ketone, methyl isobutyl ketone, cyclohexanone, toluene, xylene, etc. It generally has good miscibility with the above solvents, but the storage stability of the prepared solution must be tested. Different storage conditions may result in different storage stability. Only urethane-grade solvents (water content < 0.05%, free of active groups such as hydroxyl or amino groups) shall be used. Aliphatic hydrocarbons are not suitable as solvents.

 

WANNATE® HB-75MX shall not be diluted to a solid content below 40%. Solutions with low binder content may become cloudy and precipitate after long-term storage.

 

WANNATE® HB-75MX is generally compatible with aliphatic polyisocyanates, aromatic polyisocyanates, polyether polyols and polyacrylates, but the compatibility of the formulated solution needs to be tested.

 

This product is sensitive to moisture. High-temperature storage will cause an increase in viscosity and color number. When stored in the original unopened container under cool and dry conditions at 0–30°C, the shelf life of the product is 12 months.

 

For safety and environmental protection information, please refer to the Safety Data Sheet (SDS) of our product or contact our Customer Service Center.

 

 

The indicators and data provided herein are based on our current technical knowledge and practical experience for reference only. The specific guaranteed indicators shall be subject to the Quality Certificate or supply contract. Users are responsible for testing the purchased products of our company to verify their suitability for the intended process and application and to achieve the intended purpose. Further application and processing of our products are beyond our control. Therefore, our liability for the supplied products is limited to the portion delivered by us and used by you, and we shall not be liable for indirect losses caused in the production process using our products as raw materials.

 

Our Marketing Department Technical Support and Customer Service Center is ready to provide you with product consultation and application technology services. Welcome to contact us via letter or call.